http://www.aros.org AROS-Exec AROS-Exec Archives Power2People
kitty mascottop logo menu

graphics

Index


AddAnimOb() AddBob() AddDisplayDriverA() AddFont()
AddVSprite() AllocBitMap() AllocDBufInfo() AllocRaster()
AllocSpriteDataA() AndRectRegion() AndRectRegionND() AndRegionRegion()
AndRegionRegionND() Animate() AreaCircle() AreaDraw()
AreaEllipse() AreaEnd() AreaMove() AreRegionsEqual()
AskFont() AskSoftStyle() AttachPalExtra() AttemptLockLayerRom()
BestModeIDA() BitMapScale() BltBitMap() BltBitMapRastPort()
BltClear() BltMaskBitMapRastPort() BltPattern() BltTemplate()
CalcIVG() CBump() CEND() ChangeExtSpriteA()
ChangeSprite() ChangeVPBitMap() CINIT() ClearEOL()
ClearRectRegion() ClearRectRegionND() ClearRegion() ClearRegionRegion()
ClearRegionRegionND() ClearScreen() ClipBlit() CloseFont()
CloseMonitor() CMove() CoerceMode() CopySBitMap()
CWait() DisownBlitter() DisposeRegion() DoCollision()
Draw() DrawEllipse() DrawGList() EraseRect()
ExtendFont() FindColor() FindDisplayInfo() Flood()
FontExtent() FreeBitMap() FreeColorMap() FreeCopList()
FreeCprList() FreeDBufInfo() FreeGBuffers() FreeRaster()
FreeSprite() FreeSpriteData() FreeVPortCopLists() GetAPen()
GetBitMapAttr() GetBPen() GetColorMap() GetDisplayInfoData()
GetDrMd() GetExtSpriteA() GetGBuffers() GetOutlinePen()
GetRGB32() GetRGB4() GetRPAttrsA() GetSprite()
GetVPModeID() GfxAssociate() GfxFree() GfxLookUp()
GfxNew() InitArea() InitBitMap() InitGels()
InitGMasks() InitMasks() InitRastPort() InitTmpRas()
InitView() InitVPort() IsPointInRegion() LoadRGB32()
LoadRGB4() LoadView() LockLayerRom() MakeVPort()
ModeNotAvailable() Move() MoveSprite() MrgCop()
NewRegion() NextDisplayInfo() ObtainBestPenA() ObtainPen()
OpenFont() OpenMonitor() OrRectRegion() OrRectRegionND()
OrRegionRegion() OrRegionRegionND() OwnBlitter() PolyDraw()
QBlit() QBSBlit() ReadPixel() ReadPixelArray8()
ReadPixelLine8() RectFill() ReleasePen() RemFont()
RemIBob() RemVSprite() ScalerDiv() ScrollRaster()
ScrollRasterBF() ScrollRegion() ScrollVPort() SetABPenDrMd()
SetAPen() SetBPen() SetChipRev() SetCollision()
SetDisplayDriverCallback() SetDrMd() SetFont() SetMaxPen()
SetOutlinePen() SetRast() SetRegion() SetRGB32()
SetRGB32CM() SetRGB4() SetRGB4CM() SetRPAttrsA()
SetSoftStyle() SetWriteMask() SortGList() StripFont()
SyncSBitMap() Text() TextExtent() TextFit()
TextLength() UCopperListInit() UnlockLayerRom() VBeamPos()
VideoControl() WaitBlit() WaitBOVP() WaitTOF()
WeighTAMatch() WriteChunkyPixels() WritePixel() WritePixelArray8()
WritePixelLine8() XorRectRegion() XorRectRegionND() XorRegionRegion()
XorRegionRegionND()      

AddAnimOb()

Synopsis

void AddAnimOb(
         struct AnimOb * anOb,
         struct AnimOb ** anKey,
         struct RastPort * rp );

Function

Link the AnimOb into the list pointed to by AnimKey.
Calls AddBob with all components of a Bob and initializes
all the timers of the components of this AnimOb.
You have to provide a valid GelsInfo structure that is linked
to the RastPort (InitGels())

Inputs

anOb  = pointer to AnimOb structure to be added to list of
        AnimObs
anKey = address of a pointer to the first AnimOb in the list
        (when first calling this function the content of
        this address has to be NULL!)
rp    = pointer to a valid RastPort with initialized GelsInfo
        structure

AddBob()

Synopsis

void AddBob(
         struct Bob * bob,
         struct RastPort * rp );

Function

The Bob is linked into the current gel list via AddVSprite.
The Bob's flags are set up.

Inputs

Bob = pointer to Bob to be added to gel list
rp  = pointer to RastPort that has an initilized GelsInfo linked
      to it (see InitGels()).

AddDisplayDriverA()

Synopsis

ULONG AddDisplayDriverA(
         APTR gfxclass,
         const struct TagItem * attrs,
         const struct TagItem * tags );

ULONG AddDisplayDriver(
         APTR gfxclass,
         const struct TagItem * attrs,
         TAG tag, ... );

Function

Add a display driver to the system.

Inputs

gfxhidd - A pointer to an OOP class of the display driver
attrs   - Additional attributes to supply to the driver class during
          object creation
tags    - An optional TagList describing how graphics.library should
    handle the driver. Valid tags are:

    DDRV_BootMode     - A boolean value telling that a boot mode
                        driver is being added. Boot mode drivers
                        will automatically shut down on next
                        AddDisplayDriverA() call, unless
                        DDRV_KeepBootMode = TRUE is specified.
                        Defaults to FALSE.
    DDRV_MonitorID    - Starting monitor ID to assign to the driver.
                        Use it with care. An attempt to add already
                        existing ID will fail with a DD_ID_EXISTS
                        code. By default the next available ID will
                        be picked up automatically.
    DDRV_ReserveIDs   - The number of subsequent monitor IDs to
                        reserve. Reserved IDs can be reused only
                        with DDRV_MonitorID tag. This tag is
                        provided as an aid to support possible
                        removable display devices. Defaults to 1.
    DDRV_KeepBootMode - Do not shut down boot mode drivers. Use this
                        tag if you are 100% sure that your driver
                        won't conflict with boot mode driver (like
                        VGA or VESA) and won't attempt to take over
                        its hardware. Defaults to FALSE.
    DDRV_ResultID     - A pointer to a ULONG location where the ID
                        assigned to your driver will be placed.
                        Useful if you reserve some ID for future use.
                        Note that the returned ID will be the one
                        just assigned to your driver instance.
                        Increment it yourself in order to obtain
                        other reserved IDs.
    DDRV_IDMask       - A mask for separating the monitor ID from the
                        HIDD-specific part. This mask specifies what
                        mode ID bits are the monitor ID and what bits
                        actually specify the mode. The default value
                        is 0xFFFF0000.

                        Using the mask you can split your monitor ID
                        into 'sub-Ids'. Example:

                        Supplied tags: DDRV_IDMask, 0xFFFFFF00,
                                       DDRV_ResultID, &myid

                        After a successful call, myid will contain the
                        base ID assigned by graphics.library to your
                        driver, let's say 0x00140000. However, since
                        you specified a longer mask, you leave only
                        one byte for mode designation, and reserve
                        the whole range of IDs from 0x001400xx to
                        0x0014FFxx for different instances of your
                        driver. They can now be used by specifying
                        DDRV_MonitorID with corresponding value.

                        Note that for this feature to work correctly,
                        you also need to override ID processing in
                        your driver class. Default methods provided
                        by the hidd.graphics.graphics base class
                        suppose that the whole lower word of the mode
                        ID specifies the display mode.

                        It is generally not allowed to specify
                        shorter masks than 0xFFFF0000. The only
                        driver which can do this is the Amiga(TM)
                        chipset driver, which needs to occupy the
                        reserved range of IDs from 0x0000xxxx to
                        0x000Axxxx. In any other case, supplying a
                        short mask will cause undefined behavior.

                        Since DDRV_ReserveIDs provides a simpler way
                        to reserve IDs for your driver (without the
                        need to override mode ID processing), this
                        option can be considered experimental and
                        even private. In fact the primary reason for
                        it to exist is to provide support for
                        Amiga(tm) chipset driver.

Result

error - One of following codes:

    DD_OK           - Operation completed OK.
    DD_NO_MEM       - There is not enough memory to set up internal
                      data.
    DD_ID_EXISTS    - Attempt to assign monitor IDs that are already
                      used.
    DD_IN_USE       - One of boot-mode drivers is in use and cannot
                      be shut down.
    DD_DRIVER_ERROR - Failure to create driver object.

Notes

This function is AROS-specific.

AddFont()

Synopsis

void AddFont(
         struct TextFont * textFont );

Function

Add a font to the list of public fonts. After that, you can
open the font with OpenFont().

Inputs

textFont - The font to add.

Result

None.

AddVSprite()

Synopsis

void AddVSprite(
         struct VSprite * vs,
         struct RastPort * rp );

Function

The VSprite is linked into the current gel list using it's
y and x coordinates. The VSprite's flags are set up.

Inputs

vs = pointer to VSprite to be linked into gel list
rp = pointer to RastPort that has an initialized GelsInfo linked
     to it (see InitGels()).

AllocBitMap()

Synopsis

struct BitMap * AllocBitMap(
         UWORD sizex,
         UWORD sizey,
         ULONG depth,
         ULONG flags,
         struct BitMap * friend_bitmap );

Function

Allocates and initializes a bitmap structure. Allocates and
initializes bitplane data, and sets the bitmap's planes to point to
it.

Inputs

sizex, sizey - The width and height in pixels

depth - The depth of the bitmap. A depth of 1 will allocate a
    bitmap for two colors, a depth of 24 will allocate a bitmap for
    16 million colors. Pixels with AT LEAST this many bits will be
    allocated.

flags - One of these flags:

    BMF_CLEAR: Fill the bitmap with color 0.

    BMF_DISPLAYABLE: to specify that this bitmap data should
        be allocated in such a manner that it can be displayed.
        Displayable data has more severe alignment restrictions
        than non-displayable data in some systems.
        Note that it may be not enough to specify only this flag
        to make the bitmap really displayable. See "INTERNALS"
        section below.

    BMF_INTERLEAVED: tells graphics that you would like your
        bitmap to be allocated with one large chunk of display
        memory for all bitplanes. This minimizes color flashing on
        deep displays. If there is not enough contiguous RAM for an
        interleaved bitmap, graphics.library will fall back to a
        non-interleaved one.

    BMF_MINPLANES: causes graphics to only allocate enough
        space in the bitmap structure for "depth" plane pointers.
        This is for system use and should not be used by
        applications use as it is inefficient, and may waste
        memory.

    BMF_SPECIALFMT: causes graphics to allocate a bitmap
        of a standard CyberGraphX format. The format
        (PIXFMT_????) must be stored in the 8 most significant bits.

    BMF_RTGTAGS,
    BMF_RTGCHECK,
    BMF_FRIENDSTAG: Setting these flags to 1's while BMF_SPECIALFMT
        and BMF_INVALID are set to 0 means that friend_bitmap
        points to a taglist instead of BitMap structure.

friend_bitmap - pointer to another bitmap, or NULL. If this pointer
    is passed, then the bitmap data will be allocated in
    the most efficient form for blitting to friend_bitmap.

    This pointer can also point to a TagList, if specified by flags.
    In this case it may contain the following tags:

      - BMATags_Friend (struct BitMap *)
            An actual pointer to friend bitmap. Defaults to NULL.

      - BMATags_Depth (ULONG)
            Depth of the bitmap to create. Defaults to depth argument
            of AllocBitMap().

      - BMATags_Clear (BOOL)
            Tells if the newly created bitmap should be explicitly
            cleared. Defaults to the value of BMF_CLEAR flag in
            AllocBitMap() arguments.

      - BMATags_Displayable (BOOL)
            Tells if the bitmap should be displayable by the hardware.
            Defaults to the value of BMF_DISPLAYABLE flag in AllocBitMap()
            arguments.

      - BMATags_NoMemory (BOOL)
            Tells AllocBitMap() not to allocate actual bitmap storage. Only
            header is allocated and set up. Default value is FALSE.

      - BMATags_DisplayID (ULONG)
            Allocate a displayable bitmap for specified display mode.

Result

A pointer to the new bitmap.

Notes

When allocating using a friend_bitmap bitmap, it is not safe to assume
anything about the structure of the bitmap data if that friend_bitmap
BitMap might not be a standard Amiga bitmap (for instance, if the
workbench is running on a non-Amiga display device, its
Screen->RastPort->BitMap won't be in standard Amiga format. The
only safe operations to perform on a non-standard BitMap are:

    blitting it to another bitmap, which must be either a
        standard Amiga bitmap, or a friend_bitmap of this bitmap.

    blitting from this bitmap to a friend_bitmap bitmap or to a
        standard Amiga bitmap.

    attaching it to a rastport and making rendering calls.

Good arguments to pass for the friend_bitmap are your window's
RPort->BitMap, and your screen's RastPort->BitMap. Do NOT pass
&(screenptr->BitMap)!

BitMaps not allocated with BMF_DISPLAYABLE may not be used as
Intuition Custom BitMaps or as RasInfo->BitMaps.  They may be
blitted to a BMF_DISPLAYABLE BitMap, using one of the BltBitMap()
family of functions.

When allocating a displayable bitmap, make sure that its size is
within limits allowed by the display driver. Use GetDisplayInfoData()
with DTAG_DIMS in order to obtain the needed information.

AllocDBufInfo()

Synopsis

struct DBufInfo * AllocDBufInfo(
         struct ViewPort * vp );

Function

Allocates a double buffering structure used by ChangeVPBitMap().

Inputs

vp  -  pointer to a ViewPort

RESULTS

Returns NULL if there wasn't enough memory (or if the viewport doesn't
support double buffering).

AllocRaster()

Synopsis

PLANEPTR AllocRaster(
         UWORD width,
         UWORD height );

Function

Allocates memory for a single bitplane with the specified size in
pixels.

Inputs

width, height - The size of the resulting bitplane in pixels.

Result

A pointer to the single bitplane.

Notes

You should not use this function to create BitMaps. Call
AllocBitMap() instead.

AllocSpriteDataA()

Synopsis

struct ExtSprite * AllocSpriteDataA(
         struct BitMap * bitmap,
         struct TagItem * tagList );

struct ExtSprite * AllocSpriteData(
         struct BitMap * bitmap,
         TAG tag, ... );

Inputs

bitmap - pointer to a bitmap. This bitmap provides the source data
         for the sprite image
tags   - pointer to a taglist

Tags

SPRITEA_Width (ULONG)        - Width of the sprite. If bitmap is smaller it will
                               be filled on the right side with transparent
                               pixels. Defaults to 16.
SPRITEA_XReplication (LONG)  -  0 - perform a 1 to 1 conversion
                                1 - each pixel from the source is replicated twice
                                2 - each pixel is replicated 4 times.
                               -1 - skip every 2nc pixel in the source bitmap
                               -2 - only include every fourth pixel from the source.
SPRITEA_YReplication (LONG)  - like SPRITEA_YReplication, but for vertical direction.
SPRITEA_OutputHeight (ULONG) - Output height of the sprite. Must be at least as high
                               as the bitmap. Defaults to bitmap height.
SPRITEA_Attach               - (Not implemented)

Result

SpritePtr - pointer to a ExtSprite structure,
            or NULL if there is a failure.
            You should pass this pointer to FreeSpriteData()
            when this sprite is not needed anymore.

AndRectRegion()

Synopsis

void AndRectRegion(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Remove everything inside 'region' that is outside 'rectangle'

Inputs

region - pointer to Region structure
rectangle - pointer to Rectangle structure

Notes

This is the only *RectRegion function that cannot fail

AndRectRegionND()

Synopsis

struct Region * AndRectRegionND(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Remove everything inside 'region' that is outside 'rectangle'

Inputs

region - pointer to Region structure
rectangle - pointer to Rectangle structure

Result

The resulting region or NULL in case there's no enough free memory

AndRegionRegion()

Synopsis

BOOL AndRegionRegion(
         struct Region * R1,
         struct Region * R2 );

Function

AND of one region with another region, leaving result in
second region.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

TRUE if the operation was successful, else FALSE
(out of memory)

AndRegionRegionND()

Synopsis

struct Region * AndRegionRegionND(
         struct Region * R1,
         struct Region * R2 );

Function

AND of one region with another region

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

The resulting region or NULL in case there's no enough free memory

Animate()

Synopsis

void Animate(
         struct AnimOb ** anKey,
         struct RastPort * rp );

Function

    Animate every AnimOb in the list. In particular do the following:
    - update location and velocities
    - call AnimOb's special routine if supplied
    - for every component of the Anim ob do:
      - switch to new sequence if current sequence times out
      - call the special routine of the component if supplied
      - set the the coordinates of the VSprite of this
        sequence to whatever these routines cause

INPUT
    anKey = address of a pointer to the first AnimOb in the list
            (same address that was passed to AddAnimOb!)
    rp    = pointer to a valid RastPort structure

AreaCircle()

Synopsis

AreaCircle(
   rp,
   cx,
   cy,
   r );

Function

Calls AreaEllipse with "a" and "b" set to "r".

Notes

Implemented as macros.

AreaDraw()

Synopsis

ULONG AreaDraw(
         struct RastPort * rp,
         WORD x,
         WORD y );

Function

Add a point to the vector buffer.

Inputs

rp - pointer to a valid RastPort structure with a pointer to
     the previously initialized AreaInfo structure.
x  - x-coordinate of the point in the raster
y  - y-coordinate of the point in the raster

Result

error -  0 for success
        -1 if the vector collection matrix is full

AreaEllipse()

Synopsis

ULONG AreaEllipse(
         struct RastPort * rp,
         WORD cx,
         WORD cy,
         WORD a,
         WORD b );

Function

Add an ellipse to the vector buffer. An ellipse takes up two
entries in the buffer.

Inputs

rp - pointer to a valid RastPort structure with a pointer to
     the previously initialized AreaInfo structure.
cx - x coordinate of the center point relative to rastport
cy - y coordinate of the center point relative to rastport
a  - horizontal radius of the ellipse (> 0)
b  - vertical radius of the ellipse (> 0)

Result

error -  0 for success
        -1 if the vector collection matrix is full

AreaEnd()

Synopsis

LONG AreaEnd(
         struct RastPort * rp );

Function

Process the filled vector buffer.
After the operation the buffer is reinitialized for
processing of further Area functions.
Makes use of the raster given by the TmpRas structure that
is linked to the rastport.

Inputs

rp - pointer to a valid RastPort structure with a pointer to
     the previously initialized AreaInfo structure.

Result

error -  0 for success
        -1 a error occurred

Bugs

There is still a problem when some polygons are filled that
pixels are missing. This could be due to the way lines are
drawn. All lines should be drawn from lower
y coordinates to higher y coordinates since this is the
way the algorithm calculates lines here. For example, it
might make a difference whether a line is drawn from lower
to higher y coordinates. Examples for two same lines with
different layout:

     ****              *****
*****              ****

AreaMove()

Synopsis

ULONG AreaMove(
         struct RastPort * rp,
         WORD x,
         WORD y );

Function

Define a new starting point in the vector list for the following
polygon defined by calls to AreaDraw(). The last polygon is closed
if it wasn't closed by the user and the new starting points are
added to the vector collection matrix.

Inputs

rp - pointer to a valid RastPort structure with a pointer to
     the previously initialized AreaInfo structure.
x  - x-coordinate of the starting-point in the raster
y  - y-coordinate of the starting-point in the raster

Result

error -  0 for success
        -1 if the vector collection matrix is full

AreRegionsEqual()

Synopsis

BOOL AreRegionsEqual(
         struct Region * R1,
         struct Region * R2 );

Function

Compares two regions.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

TRUE if the regions are equal, FALSE otherwise.

AskFont()

Synopsis

void AskFont(
         struct RastPort * rp,
         struct TextAttr * textAttr );

Function

Query the attributes of the current font in a RastPort.

Inputs

rp - Query this RastPort.

Result

textAttr will contain a description of the font.

AskSoftStyle()

Synopsis

ULONG AskSoftStyle(
         struct RastPort * rp );

Function

Query algorithmically generated style attributes. These are the bits
valid to set via SetSoftStyle().

Inputs

pr   --  pointer to rastport

Result

Algorithmically generated style bits (bits not defined are also set).

AttachPalExtra()

Synopsis

LONG AttachPalExtra(
         struct ColorMap * cm,
         struct ViewPort * vp );

Function

Allocates a PalExtra structure and attaches it to the
given ColorMap. This function must be called prior to palette
sharing. The PalExtra structure will be freed by FreeColorMap().

Inputs

cm  - Pointer to a color map structure
vp  - Pointer to the viewport associated with the ColorMap

Result

0 - success
1 - out of memory

AttemptLockLayerRom()

Synopsis

BOOL AttemptLockLayerRom(
         struct Layer * l );

Function

Try to lock the current layer. If it is already locked this
function will return FALSE, TRUE otherwise.
If the layer could be locked successfully nesting will take place
which means that for every successful locking of a layer
UnlockLayerRom() has to be called for that layer to let other
tasks access that layer.

Inputs

l - pointer to layer

Result

TRUE  - layer is successfully locked for the task
FALSE - layer could not be locked, it's locked by another task.

BestModeIDA()

Synopsis

ULONG BestModeIDA(
         struct TagItem * TagItems );

ULONG BestModeID(
         TAG tag, ... );

Inputs

TagItems - pointer to an array of TagItems

Tags

BIDTAG_ViewPort (struct ViewPort *) - Viewport for which a mode is searched. Default: NULL
BIDTAG_MonitorID (ULONG)            - Returned ID must use this monitor
BIDTAG_SourceID (ULONG)             - Use this ModeID instead of a ViewPort.
                                      DIPFMustHave mask is made up of the
                                      ((DisplayInfo->PropertyFlags of this ID & SPECIAL_FLAGS) |
                                      DIPFMustHave flags).
                                      Default:
                                      if BIDTAG_ViewPort was passed: VPModeID(vp), else the
                                      DIPFMustHave and DIPFMustNotHave are unchanged.
BIDTAG_Depth (UBYTE)                - Minimal depth. Default:
                                      if BIDTAG_ViewPort is passed: vp->RasInfo->BitMap->Depth,
                                      else 1.
BIDTAG_NominalWidth (UWORD),
BIDTAG_NominalHeight (UWORD)        - Aspect ratio. Default:
                                      if BIDTAG_SourceID: SourceID NominalDimensionInfo
                                      if BIDTAG_ViewPort: vp->DWidth and vp->DHeight
                                      or 640 x 200.
BIDTAG_DesiredWidth (UWORD)         - Width. Default: DIBTAG_NominalWidth.
BIDTAG_DesiredHeight (UWORD)        - Height. Default: BIDTAG_NominalHeight.
BIDTAG_RedBits (UBYTE),
BIDTAG_GreenBits (UBYTE),
BIDTAG_BlueBits (UBYTE)             - Bits per gun the mode must support. Default: 4
BIDTAG_DIPFMustHave (ULONG)         - DIPF flags the resulting mode must have
BIDTAG_DIPFMustNotHave (ULONG)      - DIPF flags the resulting mode must not have

Result

ID - ID of the best mode to use, or INVALID_ID if a match
     could not be found

BitMapScale()

Synopsis

void BitMapScale(
         struct BitScaleArgs * bitScaleArgs );

Function

Scale a source bit map to a destination bit map other than
the source bit map.

Inputs

Pass a BitScaleArgs structure filled with the following arguments
to this function:
  bsa_SrcX, bsa_SrcY - upper left coordinate in source bitmap
  bsa_SrcWidth, bsa_SrcHeight - Width and Height of source bitmap
  bsa_DestX, bsa_DestY - upper left coordinate in destination
                         bitmap
  bsa_DestWidth, bsa_DestHeight - this function will set these
        values. Use the bsa_???Factor for scaling
  bsa_XSrcFactor:bsa_XDestFactor - Set these to get approximately
        the same ratio as bsa_SrcWidth:bsa_DestWidth, but
        usually not exactly the same number.
  bsa_YSrcFactor:bsa_YDestFactor - Set these to get approximately
        the same ratio as bsa_SrcHeight:DestHeight, but
        usually not exactly the same number.
  bsa_SrcBitMap - pointer to source bitmap to be scaled
  bsa_DestBitMap - pointer to destination bitmap which will
                   hold the scaled bitmap. Make sure it's
                   big enough!
  bsa_Flags - reserved for future use. Set it to zero!
  bsa_XDDA, bsa_YDDA - for future use.
  bsa_Reserved1, bsa_Reserved2 - for future use.

Result

bsa_DestWidth and bsa_DestHeight will be set by this function

Notes

- Overlapping source and destination bitmaps are not supported
- Make sure that you provide enough memory for the destination
  bitmap to hold the result
- In the destination bitmap only the area where the scaled
  source bitmap is put into is changed. A frame of the old
  bitmap is left.

BltBitMap()

Synopsis

LONG BltBitMap(
         struct BitMap * srcBitMap,
         LONG xSrc,
         LONG ySrc,
         struct BitMap * destBitMap,
         LONG xDest,
         LONG yDest,
         LONG xSize,
         LONG ySize,
         ULONG minterm,
         ULONG mask,
         PLANEPTR tempA );

Function

Moves a part of a bitmap around or into another bitmap.

Inputs

srcBitMap - Copy from this bitmap.
xSrc, ySrc - This is the upper left corner of the area to copy.
destBitMap - Copy to this bitmap. May be the same as srcBitMap.
xDest, yDest - Upper left corner where to place the copy
xSize, ySize - The size of the area to copy
minterm - How to copy. Most useful values are 0x00C0 for a vanilla
        copy, 0x0030 to invert the source and then copy or 0x0050
        to ignore the source and just invert the destination. If
        you want to calculate other values, then you must know that
        channel A is set, if you are inside the rectangle, channel
        B is the source and channel C is the destination of the
        rectangle.

        Bit     ABC
         0      000
         1      001
         2      010
         3      011
         4      100
         5      101
         6      110
         7      111

        So 0x00C0 means: D is set if one is inside the rectangle
        (A is set) and B (the source) is set and cleared otherwise.

        To fill the rectangle, you would want to set D when A is
        set, so the value is 0x00F0.

mask - Which planes should be copied. Typically, you should set
        this to ~0L.
tempA - If the copy overlaps exactly to the left or right (i.e. the
        scan line addresses overlap), and tempA is non-zero, it
        points to enough chip accessible memory to hold a line of a
        source for the blit (i.e. CHIP RAM). BltBitMap will allocate
        (and free) the needed TempA if none is provided and one is
        needed.  Blit overlap is determined from the relation of
        the first non-masked planes in the source and destination
        bit maps.

Result

The number of planes actually involved in the blit.

Notes

If a special hardware is available, this function will use it.

As a special case, plane pointers of destBitMap can contain NULL
or -1, which will act as if the plane was filled with 0's or 1's,
respectively.

BltBitMapRastPort()

Synopsis

void BltBitMapRastPort(
         struct BitMap   * srcBitMap,
         WORD xSrc,
         WORD ySrc,
         struct RastPort * destRP,
         WORD xDest,
         WORD yDest,
         WORD xSize,
         WORD ySize,
         ULONG minterm );

Function

Moves part of a bitmap around or into another bitmap.

BltClear()

Synopsis

void BltClear(
         void * memBlock,
         ULONG bytecount,
         ULONG flags );

Function

Use the blitter for clearing a block of Chip-Ram.

Inputs

memBlock  - pointer to beginning of memory to be cleared
flags     - set bit 0 to force function to wait until
            the blitter - if used - is done
            set bit 1 for row/bytesperrow - mode
bytecount - if bit 1 is set to 1: bytecount contains an even number
                                  of bytes to clear
            if bit 1 is set to 0: low 16 bits are taken as number of
                                  bytes per row and upper 16 bits
                                  are taken as number of rows.

Result

A cleared block of Chip-Ram.

Notes

THIS FUNCTION IS DEPRECATED except if you want to simply clear
some memory.

BltMaskBitMapRastPort()

Synopsis

void BltMaskBitMapRastPort(
         struct BitMap   * srcBitMap,
         WORD xSrc,
         WORD ySrc,
         struct RastPort * destRP,
         WORD xDest,
         WORD yDest,
         WORD xSize,
         WORD ySize,
         ULONG minterm,
         PLANEPTR bltMask );

Function

Copies a part of a bitmap to another bitmap with using a mask.

BltPattern()

Synopsis

void BltPattern(
         struct RastPort * rp,
         PLANEPTR mask,
         WORD xMin,
         WORD yMin,
         WORD xMax,
         WORD yMax,
         ULONG byteCnt );

Function

Blit using drawmode, areafill pattern and mask.

Inputs

rp - destination RastPort for blit.
mask - Mask bitplane. Set this to NULL for a rectangle.
xMin, yMin - upper left corner.
xMax, yMax - lower right corner.
byteCnt - BytesPerRow for mask.

BltTemplate()

Synopsis

void BltTemplate(
         PLANEPTR source,
         WORD xSrc,
         WORD srcMod,
         struct RastPort * destRP,
         WORD xDest,
         WORD yDest,
         WORD xSize,
         WORD ySize );

Function

Draws part of a single-bitplane image into the RastPort in the current
colors (foreground and background) and drawing mode.

Inputs

source - pointer to the aligned UWORD in which the top-lefthand corner
    of the template is located.
xSrc - bit offset of top-lefthand corner of template from start of
    UWORD pointed to by 'source' input (0 to 15).
srcMod - number of bytes per row in template's bitplane.
destRP - destination RastPort.
xDest,yDest - upper left corner of destination.
xSize,ySize - size of destination.

Result

None.

Notes

The size and destination coordinates may be outside the RastPort
boundaries, in which case the affected area is safely truncated.

CalcIVG()

Synopsis

UWORD CalcIVG(
         struct View * View,
         struct ViewPort * ViewPort );

Function

Calculate the number of blank lines above a ViewPort.

Inputs

View     - pointer to the View
ViewPort - pointer to the ViewPort you are interested in

Result

count - the number of ViewPort resolution scan lines needed
        to execute all the copper instructions for ViewPort,
        or 0 if any error

Bugs

This function is unimplemented.

CBump()

Synopsis

void CBump(
         struct UCopList * ucl );

Function

Increment user copper list pointer. If the current user copper list
is full a new one will be created and worked on.

Inputs

ucl - pointer to a UCopList structure

Notes

CWAIT() and CMOVE() automatically call this function!

CEND()

Synopsis

CEND(
   c );

Notes

Not implemeted yet.

ChangeExtSpriteA()

Synopsis

LONG ChangeExtSpriteA(
         struct ViewPort * vp,
         struct ExtSprite * oldsprite,
         struct ExtSprite * newsprite,
         struct TagItem * tags );

LONG ChangeExtSprite(
         struct ViewPort * vp,
         struct ExtSprite * oldsprite,
         struct ExtSprite * newsprite,
         TAG tag, ... );

Inputs

vp        - pointer to ViewPort structure that this sprite is
            relative to, or NULL if relative only top of View
oldsprite - pointer to the old ExtSprite structure
newsprite - pointer to the new ExtSprite structure
tags      - pointer to taglist

Result

success - 0 if there was an error

ChangeSprite()

Synopsis

void ChangeSprite(
         struct ViewPort * vp,
         struct SimpleSprite * s,
         void * newdata );

Bugs

This function is unimplemented.

ChangeVPBitMap()

Synopsis

void ChangeVPBitMap(
         struct ViewPort * vp,
         struct BitMap * bm,
         struct DBufInfo * db );

Inputs

vp - pointer to a viewport
bm - pointer to a BitMap structure. This BitMap structure must be of
     the same layout as the one attached to the viewport
     (same depth, alignment and BytesPerRow)
db - pointer to a DBufInfo

CINIT()

Synopsis

CINIT(
   c,
   n );

Notes

Not implemented yet.

ClearEOL()

Synopsis

void ClearEOL(
         struct RastPort * rp );

Function

Clear a rectangular area from the current position to the end of the
rastport, the height of which is the height of the current text font.

Inputs

pr   --  pointer to rastport

ClearRectRegion()

Synopsis

BOOL ClearRectRegion(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Clear the given Rectangle from the given Region

Inputs

region - pointer to a Region structure
rectangle - pointer to a Rectangle structure

Result

FALSE if not enough memory was available, else TRUE

ClearRectRegionND()

Synopsis

struct Region * ClearRectRegionND(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Clear the given Rectangle from the given Region

Inputs

region - pointer to Region structure
rectangle - pointer to Rectangle structure

Result

The resulting region or NULL in case there's no enough free memory

ClearRegion()

Synopsis

void ClearRegion(
         struct Region * region );

Function

Removes all rectangles in the specified region.

Inputs

region - pointer to the region structure

Result

None.

ClearRegionRegion()

Synopsis

BOOL ClearRegionRegion(
         struct Region * R1,
         struct Region * R2 );

Function

Clear the given Region region1 from the given Region region2
leaving the result in region2.

Inputs

region1 - pointer to a Region structure
region2 - pointer to a Rectangle structure

Result

FALSE if not enough memory was available, else TRUE

Notes

This function does not exist in AmigaOS.

ClearRegionRegionND()

Synopsis

struct Region * ClearRegionRegionND(
         struct Region * R1,
         struct Region * R2 );

Function

Clear the given Region region1 from the given Region region2.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

The resulting region or NULL in case there's no enough free memory

ClearScreen()

Synopsis

void ClearScreen(
         struct RastPort * rp );

Function

Clear from the current position to the end of the rastport. Clearing
means setting the colour to 0 (or to BgPen if the drawmode is JAM2).
This includes a ClearEOL().

Inputs

rp   --  pointer to rastport

ClipBlit()

Synopsis

void ClipBlit(
         struct RastPort * srcRP,
         WORD xSrc,
         WORD ySrc,
         struct RastPort * destRP,
         WORD xDest,
         WORD yDest,
         WORD xSize,
         WORD ySize,
         UBYTE minterm );

Function

Copies the contents of one rastport to another rastport.
Takes care of layered and non-layered source and destination
rastports.
If you have a window you should always use this function instead
of BltBitMap().

Inputs

srcRP        - Copy from this RastPort.
xSrc, ySrc   - This is the upper left corner of the area to copy.
destRP       - Copy to this RastPort.
xDest, yDest - Upper left corner where to place the copy
xSize, ySize - The size of the area to copy
minterm - How to copy. Most useful values are 0x00C0 for a vanilla
        copy, 0x0030 to invert the source and then copy or 0x0050
        to ignore the source and just invert the destination. If
        you want to calculate other values, then you must know that
        channel A is set, if you are inside the rectangle, channel
        B is the source and channel C is the destination of the
        rectangle.

        Bit     ABC
         0      000
         1      001
         2      010
         3      011
         4      100
         5      101
         6      110
         7      111

        So 0x00C0 means: D is set if one is inside the rectangle
        (A is set) and B (the source) is set and cleared otherwise.

        To fill the rectangle, you would want to set D when A is
        set, so the value is 0x00F0.

Result

None

CloseFont()

Synopsis

void CloseFont(
         struct TextFont * textFont );

Function

Close a font.

Inputs

font - font pointer from OpenFont() or OpenDiskFont()

CloseMonitor()

Synopsis

LONG CloseMonitor(
         struct MonitorSpec * monitor_spec );

Inputs

monitor_spec - pointer to a MonitorSpec opened via OpenMonitor(),
               or NULL

Result

error - FALSE if MonitorSpec closed uneventfully
        TRUE if MonitorSpec could not be closed

CMove()

Synopsis

void CMove(
         struct UCopList * ucl,
         void * reg,
         WORD value );

Function

Add a copper move instruction to the given user copper list.
The copper is told to move a value to register reg.
If you are using CMOVE() a call to CMove() and CBump() will
be made.

Inputs

ucl   - pointer to a UCopList structure
reg   - hardware register
value - 16 bit value to be moved to the hardware register

CoerceMode()

Synopsis

ULONG CoerceMode(
         struct ViewPort * RealViewPort,
         ULONG MonitorID,
         ULONG Flags );

Function

Determine the best mode in the MonitorID to coerce RealViewPort to.

Inputs

RealViewPort - ViewPort to coerce
MonitorID    - Monitor number to coerce to
               (i.e. a mode masked with MONITOR_ID_MASK)
Flags        - PRESERVE_COLORS - keep the number of bitplanes
                                 in the ViewPort
               AVOID_FLICKER   - do not coerce to an interlace mode

Result

ID - ID of best mode to coerce to, or INVALID_ID if could not coerce

Bugs

This function is unimplemented.

CopySBitMap()

Synopsis

void CopySBitMap(
         struct Layer * l );

Function

If the layer has a superbitmap all the parts that are visible will
be refreshed with what is in the superbitmap. This function should
be called after the SuperBitMap of the layer was synchronized with
SyncSBitMap() and manipulated.

Inputs

l  - pointer to superbitmapped layer

Result

The layer will show the true contents of the superbitmap that is
attached to it

CWait()

Synopsis

void CWait(
         struct UCopList * ucl,
         WORD v,
         WORD h );

Function

Add a copper wait instruction to the given user copper list.
The copper is told to wait for a vertical beam position v and
a horizontal beam position h.
If you are using CWAIT() a call to CWait() and CBump() will
be made.

Inputs

ucl - pointer to a UCopList structure
v   - vertical beam position (relative to top of viewport)
h   - horizontal beam position

Bugs

It's illegal to wait for horizontal values greater than 222 decimal!

DisownBlitter()

Synopsis

void DisownBlitter();

Function

The blitter is returned to usage by other tasks.

DisposeRegion()

Synopsis

void DisposeRegion(
         struct Region * region );

Function

Frees all memory allocated by this region, including its
RegionRectangles.

Inputs

region - pointer to a Region structure

Result

None.

DoCollision()

Synopsis

void DoCollision(
         struct RastPort * rp );

Function

Tests each gel in gel list for boundary and gel-to-gel collisions.
If a collision happens the collision handling routine is called.
The gel list must be sorted by y,x order.

Inputs

rp - pointer to RastPort

Draw()

Synopsis

void Draw(
         struct RastPort * rp,
         WORD x,
         WORD y );

Function

Draw a line from the current pen position to the given coordinate.

Inputs

rp  - destination RastPort.
x,y - line end coordinate.

Notes

Not yet implemented:

  - handle layer->Scroll_X/Scroll_Y.

  - handle FRST_DOT which indicates whether to draw
    or to don't draw first pixel of line. Important
    for COMPLEMENT drawmode.

DrawEllipse()

Synopsis

void DrawEllipse(
         struct RastPort * rp,
         WORD xCenter,
         WORD yCenter,
         WORD a,
         WORD b );

Function

Draw an ellipse

Inputs

rp              - destination RastPort
xCenter,yCenter - coordinate of centerpoint
a               - radius in x direction
b               - radius in y direction

DrawGList()

Synopsis

void DrawGList(
         struct RastPort * rp,
         struct ViewPort * vp );

Function

Process the gel list, draw VSprites and Bobs.

Inputs

rp - RastPort where Bobs will be drawn
vp - ViewPort for VSprites

EraseRect()

Synopsis

void EraseRect(
         struct RastPort * rp,
         LONG xMin,
         LONG yMin,
         LONG xMax,
         LONG yMax );

Function

Fill a rectangular area with the current BackFill hook.
If layered the BackFill hook is used.
If non-layered the region is cleared.

Inputs

rp        - destination RastPort
xMin,yMin - upper left corner
xMax,YMax - lower right corner

ExtendFont()

Synopsis

ULONG ExtendFont(
         struct TextFont * font,
         struct TagItem  * fontTags );

Function

Checks whether or not a TextFont has a TextFontExtension.
If no extension exists, and tags are supplied,
then it will try to build one.

Inputs

font            - font to check for an extension.
fontTags        - tags to build the TextFontExtension from if it doesn't exist.
                  If a NULL pointer is given, ExtendFont will allocate default tags.

Result

success         - FALSE if the font has no TextFontExtension and an extension
                  can't be built. TRUE otherwise.

FindColor()

Synopsis

ULONG FindColor(
         struct ColorMap * cm,
         ULONG r,
         ULONG g,
         ULONG b,
         ULONG maxpen );

Function

Find the closest matching color in the given colormap.

Inputs

cm - colormap structure
r  - red level   (32 bit left justified fraction)
g  - green level (32 bit left justified fraction)
b  - blue level  (32 bit left justified fraction)
maxpen - the maximum entry in the color table to search.

Result

The pen number with the closest match will be returned.
No new pens are allocated and therefore the returned pen
should not be released via ReleasePen().

FindDisplayInfo()

Synopsis

DisplayInfoHandle FindDisplayInfo(
         ULONG ID );

Function

Search for a DisplayInfo which matches the ID key.

Inputs

ID - identifier

Result

handle - handle to a displayinfo record with that key
         or NULL if no match

Flood()

Synopsis

BOOL Flood(
         struct RastPort * rp,
         ULONG mode,
         LONG x,
         LONG y );

Function

Flood fill a RastPort.

Inputs

rp   - destination RastPort
mode - 0: fill adjacent pixels which don't have color of OPen.
       1: fill adjacent pixels which have the same pen as of coordinate x,y.
x,y  - coordinate to start filling.

Notes

The RastPort must have a TmpRas raster whose size is as large as of
that of the RastPort.

FontExtent()

Synopsis

void FontExtent(
         struct TextFont   * font,
         struct TextExtent * fontExtent );

Function

Fill out a text extent structure with the maximum extent of the
characters for the font in question.

Inputs

font        --  The font the extent of which to calculate.
fontExtent  --  TextExtent structure to hold the values.

Result

The extent is stored in 'fontExtent'.

Notes

Neither effects of algorithmic additions nor rp_TxSpacing is included
when the bounding box and font size are calculated. Note that te_Width
only will be negative when FPF_REVPATH is specified for the font; left
moving characters are ignored considering the font width (right moving
character when FPF_REVPATH is set), but affects the bounding box size.

FreeBitMap()

Synopsis

void FreeBitMap(
         struct BitMap * bm );

Function

Returns the memory occupied by the BitMap to the system.

Inputs

bm - The result of AllocBitMap(). Must be non-NULL.

Result

None.

FreeColorMap()

Synopsis

void FreeColorMap(
         struct ColorMap * colormap );

Function

Correctly frees a ColorMap structure and associated structures
that have previously been allocated via GetColorMap().

Inputs

colormap - pointer to the ColorMap structure previously
           allocated via GetColorMap().

Result

Memory returned to pool of free memory.

FreeCopList()

Synopsis

void FreeCopList(
         struct CopList * coplist );

Function

Deallocate all memory associated with this copper list.

Inputs

coplist - pointer to a CopList structure

FreeCprList()

Synopsis

void FreeCprList(
         struct cprlist * cprList );

Function

Deallocate all memory associated with this cprlist structure

Inputs

cprlist - pointer to a cprlist structure

FreeDBufInfo()

Synopsis

VOID FreeDBufInfo(
         struct DBufInfo * db );

Function

Frees structure allocated with AllocDBufInfo().

Inputs

RESULTS

Frees memory occupied by 'db'; ('db' may be NULL, in that case nothing
is done).

FreeGBuffers()

Synopsis

void FreeGBuffers(
         struct AnimOb * anOb,
         struct RastPort * rp,
         BOOL db );

Function

Deallocate all buffers for a whole AnimOb. In particular this
means getting buffers for
- BorderLine
- SaveBuffer
- CollMask
- ImageShadow (points to the same memory as CollMask does)
- if db is set to TRUE the user wants double-buffering, so we need
  - DBufPacket
  - BufBuffer

Inputs

anOb = pointer to AnimOb structure to be added to list of
       AnimObs
rp   = pointer to a valid RastPort with initialized GelsInfo
       structure
db   = TRUE when double-buffering is wanted

Notes

A call to GetGBuffers() that resulted in a partially allocation
of the required buffers will result in a deallocation of these
buffers. (Possible incompatibility with the real thing, though)

FreeRaster()

Synopsis

void FreeRaster(
         PLANEPTR p,
         UWORD width,
         UWORD height );

Function

Free the single bitplane allocated by AllocRaster().

Inputs

p - The result of AllocRaster(). Must be non-NULL.
width, height - The size of the bitplane as passed to AllocRaster().

Result

The memory occupied by the bitplane will be returned to the system.

FreeSprite()

Synopsis

void FreeSprite(
         WORD pick );

Function

Free a via GetSprite previously allocated sprite.
Don't even dare to free a sprite you didn't allocate.

Inputs

pick - number of sprite in range 0-7

Result

Sprite is made available for other tasks and the Virtual Sprite
Machine.

FreeSpriteData()

Synopsis

void FreeSpriteData(
         struct ExtSprite * extsp );

Function

Free sprite data allocated by AllocSpriteData().

Inputs

extsp - The extended sprite structure to be freed.
        Passing NULL is a NO-OP.

FreeVPortCopLists()

Synopsis

void FreeVPortCopLists(
         struct ViewPort * vp );

Function

Deallocate all memory associated with the CopList structures
for display, color, sprite and the user copper list. The
corresponding fields in this structure will be set to NULL.

Inputs

vp - pointer to a ViewPort structure

GetAPen()

Synopsis

ULONG GetAPen(
         struct RastPort * rp );

Function

Return the current value of the A pen for the rastport.

Inputs

rp - RastPort.

GetBitMapAttr()

Synopsis

IPTR GetBitMapAttr(
         struct BitMap * bitmap,
         ULONG attribute );

Function

Returns a specific information about a bitmap. Do not access the
bitmap directly!

Inputs

bitmap - The BitMap structure to get information about.
attribute - Number of the attribute to get. See <graphics/gfx.h> for
            possible values.

Result

The information you requested. If you asked for an unknown attribute,
0 or NULL is returned.

GetBPen()

Synopsis

ULONG GetBPen(
         struct RastPort * rp );

Function

Return the current value of the B pen for the rastport.

Inputs

rp - RastPort.

GetColorMap()

Synopsis

struct ColorMap * GetColorMap(
         ULONG entries );

Function

Allocates and initializes a ColorMap structure and passes back the
pointer. This enables you to do calls to SetRGB4() and LoadRGB4()
to load colors for a view port.
The ColorTable pointer in the ColorMap structure points to a hardware
specific colormap data structure which you should not interpret.

Inputs

entries - the number of entries for the colormap

Result

NULL  - not enough memory could be allocated for the necessary
        data structures
other - pointer to an initialized ColorMap structure that may be
        stored into the ViewPort.ColorMap pointer.

GetDisplayInfoData()

Synopsis

ULONG GetDisplayInfoData(
         DisplayInfoHandle handle,
         UBYTE * buf,
         ULONG size,
         ULONG tagID,
         ULONG ID );

Function

Fills buffer with information about displayinfo handle.

Inputs

handle - displayinfo handle
buf    - pointer to destination buffer
size   - buffer size in bytes
tagID  - data chunk type
         DTAG_DISP (DisplayInfo)
         DTAG_DIMS (DimensionInfo)
         DTAG_MNTR (MonitorInfo)
         DTAG_NAME (NameInfo)
ID     - displayinfo identifier, optionally used if handle is NULL

Result

result - if positive, number of bytes actually transferred
         if zero, no information for ID was available

GetDrMd()

Synopsis

ULONG GetDrMd(
         struct RastPort * rp );

Function

Get drawmode value of RastPort.

Inputs

rp - RastPort

GetExtSpriteA()

Synopsis

LONG GetExtSpriteA(
         struct ExtSprite * sprite,
         struct TagItem * tags );

LONG GetExtSprite(
         struct ExtSprite * sprite,
         TAG tag, ... );

Inputs

sprite - pointer to programmer's ExtSprite (from AllocSpriteData())
tags   - a standard tag list

Result

Sprite_number - a sprite number or -1 for an error

GetGBuffers()

Synopsis

BOOL GetGBuffers(
         struct AnimOb * anOb,
         struct RastPort * rp,
         BOOL db );

Function

Allocate all buffers for a whole AnimOb. In particular this
means getting buffers for
- BorderLine
- SaveBuffer
- CollMask
- ImageShadow (points to the same memory as CollMask does)
- if db is set to TRUE the user wants double-buffering, so we need
  - DBufPacket
  - BufBuffer

Inputs

anOb = pointer to AnimOb structure to be added to list of
       AnimObs
rp   = pointer to a valid RastPort with initialized GelsInfo
       structure
db   = TRUE when double-buffering is wanted

Result

TRUE, if all the memory allocations were successful, otherwise
FALSE

Notes

If an AnimOb is passed to GetGBuffers twice new buffers will
be allocated and therefore old pointers to buffers will be
lost in space.

GetOutlinePen()

Synopsis

ULONG GetOutlinePen(
         struct RastPort * rp );

Function

Get the outline pen value for a RastPort.

Inputs

rp - RastPort.

GetRGB32()

Synopsis

void GetRGB32(
         struct ColorMap * cm,
         ULONG firstcolor,
         ULONG ncolors,
         ULONG * table );

Function

Fill the table with the 32 bit fractional RGB values from the
given colormap.

Inputs

cm         - ColorMap structure obtained via GetColorMap()
firstcolor - the index of first color register to get (starting with 0)
ncolors    - the number of color registers to examine and write
             into the table
table      - a pointer to an array of 32 bit RGB triplets

Result

the ULONG pointed to by table will be filled with the 32 bit
fractional RGB values from the colormap

Notes

table should point to an array of at least 3*ncolors longwords.

GetRGB4()

Synopsis

ULONG GetRGB4(
         struct ColorMap * colormap,
         LONG entry );

Function

Read a value from the ColorMap. Use this function, as the colormap
is subject to change.

Inputs

colormap - pointer to ColorMap structure
entry    - index into colormap

Result

-1      : if no valid entry. (index too high)
other   : UWORD RGB value, 4 bits per electron gun, right justified

GetRPAttrsA()

Synopsis

void GetRPAttrsA(
         struct RastPort * rp,
         struct TagItem  * tags );

void GetRPAttrs(
         struct RastPort * rp,
         TAG tag, ... );

Function

Read the current settings of a RastPort into variables.
The ti_Tag field specifies the attribute to read and the
ti_Data field points to an address where to store the result.
All results are stored as IPTRs!

Inputs

rp   = pointer to a RastPort structure
tags = pointer to a taglist specifying the attributes to read and
       the addresses to store the results

Tags

RPTAG_Font (UBYTE)              - Font for Text()
RPTAG_APen (UBYTE)              - Primary rendering pen
RPTAG_BPen (UBYTE)              - Secondary rendering pen
RPTAG_DrMd (UBYTE)              - Drawing mode (graphics/rastport.h)
RPTAG_OutlinePen (UBYTE)        - Area Outline pen
RPTAG_WriteMask (ULONG)         - Bit Mask for writing
RPTAG_MaxPen (ULONG)            - Maximum pen to render (see SetMaxPen())

MorphOS-compatible extensions:

RPTAG_FgColor (ULONG)           - Primary rendering color in A8R8G8B8 format.
                                  Only working on hicolor/truecolor bitmaps/screens.
RPTAG_BgColor (ULONG)           - Secondary rendering color in A8R8G8B8 format.
                                  Only working on hicolor/truecolor bitmaps/screens.

AmigaOSv4-compatible extensions:

RPTAG_RemapColorFonts (BOOL)    - Automatically remap colorfonts to their color
                                  on hicolor/truecolor screens.

AROS-specific extensions:

RPTAG_ClipRectangle (struct Rectangle *) - Rectangle to clip rendering to. Rectangle will
                                           be cloned.
RPTAG_ClipRectangleFlags (LONG) - RPCRF_RELRIGHT | RPCRF_RELBOTTOM (see <graphics/rpattr.h>)

Notes

RPTAG_ClipRectangle and RPTAG_ClipRectangleFlags must not be
used on manually inited or cloned rastports. Instead the rastport
must have been created with CreateRastPort() or CloneRastPort().

Bugs

RPTAG_SoftStyle and RPTAG_DrawBounds are not supported yet.

GetSprite()

Synopsis

WORD GetSprite(
         struct SimpleSprite * sprite,
         WORD pick );

Function

Try to get a hardware sprite for the simple sprite manager.
There are eight sprites available in the system and by calling
this function you can allocate one for yourself. You have to
call this function before talking to other sprite routines.
If you want a 15 color sprite, you must allocate both sprites
(see the manual!) and set the SPRITE_ATTACHED bit in the
odd sprite's posctldata array.

Inputs

sprite - pointer to a SimpleSprite structure
pick   - number of the sprite (0-7) of -1 if you just want
         the next available sprite

Result

-1 - if the selected sprite is not available (pick was 0-7) or
     no further sprites are available (pick was -1). -1 will
     also be found in the SimpleSprite structure.
0-7: The sprite number of your allocated sprite. The number will
     also be found in the SimpleSprite structure.

Bugs

On some machines this will never return anything else than -1!

GetVPModeID()

Synopsis

ULONG GetVPModeID(
         struct ViewPort * vp );

Function

returns the normal display modeID, if one is currently associated
with this ViewPort

Inputs

vp - pointer to ViewPort structure

Result

modeID - a 32 bit DisplayInfoRecord identifier associated
         with this ViewPort, or INVALID_ID

GfxAssociate()

Synopsis

void GfxAssociate(
         void * pointer,
         struct ExtendedNode * node );

Function

Associate a special graphics extended data structure with another
structure via the other structure's pointer. Later, when you call
GfxLookUp() with the other structure's pointer you may receive
the pointer to this special graphics extended data structure, if it
is available

Inputs

pointer = a pointer to a data structure
node = an ExtendedNode structure to associate with the pointer

Result

an association is created between the pointer and the node such
that given the pointer the node can be retrieved via GfxLookUp().

Notes

Never associate one special graphics extended data structure to
several pointers. Only one pointer is allowed!

GfxFree()

Synopsis

void GfxFree(
         struct ExtendedNode * node );

Function

Free a special graphics extended data structure which was preciously
allocated by GfxNew()

Inputs

node = pointer to a graphics extended data structure obtained by
       GfxNew()

Result

The node will be deallocated from memory. Graphics will disassociate
this special graphics extended node from any associated data
structure, if necessary, before freeing it (see GfxAssociate())

GfxLookUp()

Synopsis

struct ExtendedNode * GfxLookUp(
         void * pointer );

Function

Finds a special graphics extended data structure (if an) associated
with the pointer to a data structure (e.g.: ViewExtra associated with
a View structure).

Inputs

pointer = a pointer to a data structure which may have an
          ExtendedNode associated with it (typically a View)

Result

result = a pointer to the ExtendedNode that has previously been
         associated with the pointer

GfxNew()

Synopsis

struct ExtendedNode * GfxNew(
         ULONG node_type );

Function

Allocate a special graphics extended data structure. The type of
structure to be allocated is passed in the node_type identifier.

Inputs

node_type = the type of graphics extended data structure to allocate.
            (see gfxnodes.h for identifier definitions.)

Result

A pointer to the allocated graphics node or NULL if the allocation
failed

InitArea()

Synopsis

void InitArea(
         struct AreaInfo * areainfo,
         void * buffer,
         WORD maxvectors );

Function

This function initializes an areainfo structure. The size of the
passed pointer to the buffer should be 5 times as large as
maxvectors (in bytes).

Inputs

areainfo   - pointer to AreaInfo structure to be initialized
buffer     - pointer to free memory to collect vectors
maxvectors - maximum number of vectors the buffer can hold.

Result

Areainfo structure initialized such that it will hold the vectors
created by AreaMove, AreaDraw and AreaEllipse (AreaCircle).

InitBitMap()

Synopsis

VOID InitBitMap(
         struct BitMap * bm,
         BYTE depth,
         UWORD width,
         UWORD height );

Function

Initialize BitMap structure. A bitmap MUST be initialized before it's
used in any (other) graphics library function.

Inputs

bm     --  pointer to BitMap structure
depth  --  number of bitplanes
width  --  width in pixels of this bitmap
height --  height in pixels of this bitmap

Notes

The Planes[] is not affected and must be set up the caller.

InitGels()

Synopsis

void InitGels(
         struct VSprite * head,
         struct VSprite * tail,
         struct GelsInfo * GInfo );

Function

Makes the two VSprites head and tail of the gel list that is connected
to the GelsInfo structure. The two VSprites are linked together and
their x and y coordinates are initialized such that the serve as the
keystones of the list.

Inputs

head  - pointer to the VSprite structure to be used as head of the gel list
tail  - pointer to the VSprite structure to be used as tail of the gel list
GInfo - pointer to the GelsInfo structure to be initialized

See also

graphics/rastport.h graphics/gels.h


InitGMasks()

Synopsis

void InitGMasks(
         struct AnimOb * anOb );

Function

For every component's sequence initialize the Masks by calling
InitMasks()

Inputs

anOb = pointer to the AnimOb

InitMasks()

Synopsis

void InitMasks(
         struct VSprite * vs );

Function

Creates the standard BorderLine and CollMask masks of the VSprite.
VSprites and Bobs are treated accordingly.

Inputs

vs = pointer to VSprite structure

InitRastPort()

Synopsis

void InitRastPort(
         struct RastPort * rp );

Function

Initializes a RastPort structure.

Inputs

rp - The RastPort to initialize.

Result

all entries in RastPort get zeroed out, with the following exceptions:

    Mask, FgPen, AOLPen, and LinePtrn are set to -1.
    The DrawMode is set to JAM2
    The font is set to the standard system font

InitTmpRas()

Synopsis

struct TmpRas  * InitTmpRas(
         struct TmpRas  * tmpras,
         void * buffer,
         ULONG size );

Function

Initializes a TmpRas structure. The user has to connect the
TmpRas structure to the rastport.
Some routines need extra memory in order to be able to operate
properly.

Inputs

tmpras - pointer to a TmpRas structure to be initialized
buffer - pointer to a piece of chip memory.
size   - size in bytes of buffer.

Result

Properly initialized TmpRas structure to link to RastPort structure
for use with functions like Flood(), Text() and AreaEnd().

Notes

Alltough the RKRM says InitTmpRas is a VOID function every SDK
implements it so that it returns the tmpras argument.

Bugs

The function itself is a bug.
Why does this function exist at all? The necessary memory should
be allocated in InitRastPort() or the functions that need it.

InitView()

Synopsis

void InitView(
         struct View * view );

Function

Initializes a View structure.

Inputs

view - The View to initialize.

Result

View is initialized to it`s default values - doesn't care about
previous contents of this structure.
All values except for DxOffset,DyOffset are set to 0's.

InitVPort()

Synopsis

void InitVPort(
         struct ViewPort * vp );

Function

Initializes a ViewPort structure.

Inputs

view - The View to initialize.

Result

ViewPort is initialized to it`s default values - doesn't care about
previous contents of this structure.
All values except for SpritePriorities are set to 0's.

IsPointInRegion()

Synopsis

BOOL IsPointInRegion(
         struct Region * Reg,
         WORD x,
         WORD y );

Function

Checks if the point (x, y) is contained in the region Reg

Inputs

region1 - pointer to a region structure
x       - The point's 'x' coordinate
y       - The point's 'y' coordinate

Result

TRUE if the point is contained, FALSE otherwise

Notes

This function isn't available in AmigaOS.

LoadRGB32()

Synopsis

void LoadRGB32(
         struct ViewPort * vp,
         const ULONG     * table );

Function

Load RGB color values from table.

Inputs

vp    - ViewPort
table - pointer to table of records
        1 Word with the number of colors to load
        1 Word with the first color to be loaded.
        3 Longwords representing a left justified 32 bit RGB triplet.
        The list is terminated by a count value of 0.

Example

ULONG table[] = { 1l << 16 + 0 , 0xffffffff , 0 , 0 , 0}
ULONG table[] = { 256l << 16 + 0 , r1 , g1 , b1 , r2 , g2 , b2 , ..... 0}

LoadRGB4()

Synopsis

void LoadRGB4(
         struct ViewPort * vp,
         UWORD           * colors,
         WORD count );

Function

Load RGB color values from table.

Inputs

vp     - ViewPort
colors - pointer to table of RGB values (0...15)
                background--  0x0RGB
                color1    --  0x0RGB
                color2    --  0x0RGB
                ...
count   - number of UWORDs in the table

LoadView()

Synopsis

void LoadView(
         struct View * view );

Function

Display a new view

Inputs

view - pointer to the View structure which contains the pointer to the
       constructed coprocessor instructions list, or NULL

Result

None.

LockLayerRom()

Synopsis

void LockLayerRom(
         struct Layer * l );

Function

Locks the layer. Returns when the layer is locked for
exclusive use.
This call behaves like when a semaphore is locked. The
same task may lock the same layer several times without
locking itself out. For every call to this function a
call to UnlockLayerRom() has to be made as the calls nest.
This function will also prevent intuition from locking the
layer so the layer should not be blocked too long.
This function does exactly the same as layers/LockLayer()

Inputs

l - pointer to layer that is to be locked

Bugs

Does not save all registers.

MakeVPort()

Synopsis

ULONG MakeVPort(
         struct View * view,
         struct ViewPort * viewport );

Function

Prepare a ViewPort to be displayed. Calculate all necessary internal data.
For Amiga(tm) chipset bitmaps this includes calculating preliminary copperlists.

Inputs

view     - pointer to a View structure
viewport - pointer to a ViewPort structure
           the viewport must have a valid pointer to a RasInfo

Result

error - Result of the operation:
    MVP_OK         - Everything is OK, ViewPort is ready
    MVP_NO_MEM     - There was not enough memory for internal data
    MVP_NO_VPE     - There was no ViewPortExtra for this ViewPort and no memory to
                     allocate a temporary one.
    MVP_NO_DSPINS  - There was not enough memory for Amiga(tm) copperlist.
    MVP_NO_DISPLAY - The BitMap can't be displayed using specified mode (for example,
                     misaligned or wrong depth).

ModeNotAvailable()

Synopsis

ULONG ModeNotAvailable(
         ULONG modeID );

Function

returns an error code, indicating why this modeID is not available,
or 0 if there is no reason known why this mode should not be there

Inputs

modeID - a 32 bit DisplayInfoRecord identifier

Result

error - a general indication of why this modeID is not available,
        or 0 if there is no reason why it should not be available

Move()

Synopsis

void Move(
         struct RastPort * rp,
         WORD x,
         WORD y );

Function

Move the drawing pen to (x,y).

Inputs

rp  - RastPort
x,y - target coordinate

MoveSprite()

Synopsis

void MoveSprite(
         struct ViewPort * vp,
         struct SimpleSprite * sprite,
         WORD x,
         WORD y );

Function

Move sprite to a new position on the screen. Coordinates
are specified relatively to given ViewPort, or relatively
to the entire View (physical display) if the ViewPort is NULL.

This function works also with extended sprites, since
struct SimpleSprite is a part of struct ExtSprite.

Inputs

vp     - a ViewPort for relative sprite positioning or NULL
sprite - a pointer to a sprite descriptor structure
x      - a new X coordinate
y      - a new Y coordinate

Result

None.

Notes

AROS currently supports only one sprite #0 for mouse pointer.
Other sprite numbers are ignored by this function.

ViewPort is also used in order to specify the physical display.
If it's not specified, Amiga(tm) chipset display is assumed.
This is available only on Amiga(tm) architecture.

MrgCop()

Synopsis

ULONG MrgCop(
         struct View * view );

Function

Prepare the view for being displayed. Calculate necessary internal data.
For Amiga(tm) chipset this function also merges together the display, color, sprite and user
coprocessor instructions into a single coprocessor instruction stream.

Inputs

view - a pointer to the view structure to prepare

Result

error - ULONG error value indicating either lack of memory to build the system data,
                or that MrgCop() has no work to do - ie there where no viewPorts in the list.

Notes

Pre-v39 AmigaOS returns void.

If the given view is already on display, changes appear immediately.

NewRegion()

Synopsis

struct Region * NewRegion();

Function

Allocates memory for a new Region and initializes it
to an empty Region.

Result

region - pointer to a newly created Region structure that
         should be freed by a call to DisposeRegion()

NextDisplayInfo()

Synopsis

ULONG NextDisplayInfo(
         ULONG last_ID );

Function

Go to next entry in the DisplayInfo database.

Inputs

last_ID - previous displayinfo identifier
          or INVALID_ID if beginning iteration

Result

next_ID - subsequent displayinfo identifier
          or INVALID_ID if no more records

ObtainBestPenA()

Synopsis

LONG ObtainBestPenA(
         struct ColorMap * cm,
         ULONG r,
         ULONG g,
         ULONG b,
         struct TagItem * tags );

LONG ObtainBestPen(
         struct ColorMap * cm,
         ULONG r,
         ULONG g,
         ULONG b,
         TAG tag, ... );

Function

Try to find a pen which matches the given parameters.

Inputs

cm   - colormap
r    - red value (32 bit left justified fraction)
g    - green value (32 bit left justified fraction)
b    - blue value (32 bit left justified fraction)
tags - tagarray
       OBP_Precision - PRECISION_GUI, PRECISION_ICON, PRECISION_IMAGE or PRECISION_EXACT.
                       Defaults to PRECISION_IMAGE.

       OBP_FailIfBad - if TRUE ObtainBestPen returns an error when there
                       is no color in the given tolerance.

Result

A pen value or -1 if no pen could be found.

Notes

You must call ReleasePen() when you're done with the pen.

ObtainPen()

Synopsis

LONG ObtainPen(
         struct ColorMap * cm,
         ULONG n,
         ULONG r,
         ULONG g,
         ULONG b,
         ULONG flags );

Function

Attempt to allocate an entry in the colormap for exclusive
or shared use by the application. To deallocate the pen
ReleasePen() must be called.

Inputs

cm    - A pointer to a color map structure
n     - index of the entry in the color map; if any entry is fine
        pass -1
r     - red value (left justified 32 bit fraction)
g     - green value (left justified 32 bit fraction)
b     - blue value (left justified 32 bit fraction)
flags - PEN_EXCLUSIVE - for exclusive access to a color register;
                      default is shared access

        PEN_NO_SETCOLOR - will not change the RGB values
                          for the selected pen.

Result

n  = allocated pen number, -1 for failure

Notes

Shared palette entries should not be changed (via SetRGB??())
since other applications might use the same color.
A PaletteExtra structure must have been attached to the
ColorMap prior to calling this function (AttachPalExtra()).

OpenFont()

Synopsis

struct TextFont * OpenFont(
         const struct TextAttr * textAttr );

Function

Searches for a text font which best matches the specified attributes.

Inputs

textAttr - pointer to a TextAttr or TTextAttr font description.

Result

Returns NULL if the font can't be found.

OpenMonitor()

Synopsis

struct MonitorSpec * OpenMonitor(
         STRPTR monitor_name,
         ULONG display_id );

Inputs

monitor_name - pointer to a null terminated string
display_id   - optional 32 bit monitor/mode identifier

Result

mspc - pointer to an open MonitorSpec structure
       NULL if MonitorSpec could not be opened

OrRectRegion()

Synopsis

BOOL OrRectRegion(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Add the given Rectangle to the given Region (if not
already there)

Inputs

region - pointer to Region structure
rectangle - pointer to Rectangle structure

Result

TRUE if the operation was successful, else FALSE
(out of memory)

Notes

All relevant data is copied, you may throw away the
given rectangle after calling this function

OrRectRegionND()

Synopsis

struct Region * OrRectRegionND(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Add the given Rectangle to the given Region (if not
already there)

Inputs

region - pointer to Region structure
rectangle - pointer to Rectangle structure

Result

The resulting region or NULL in case there's no enough free memory

OrRegionRegion()

Synopsis

BOOL OrRegionRegion(
         struct Region * R1,
         struct Region * R2 );

Function

OR of one region with another region, leaving result in
second region.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

TRUE if the operation was successful, else FALSE
(out of memory)

OrRegionRegionND()

Synopsis

struct Region * OrRegionRegionND(
         struct Region * R1,
         struct Region * R2 );

Function

OR of one region with another region.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

The resulting region or NULL in case there's no enough free memory

OwnBlitter()

Synopsis

void OwnBlitter();

Function

The blitter is allocated for exclusive use by the calling task.
This function returns immediately if no other task is using
the blitter right now or if no blits are in the queues (QBlit(),
QBSBlit()). Otherwise the function will block until the blitter
can be accessed.
It is good practice to start the blitter immediately after calling
this function and then call DisownBlitter() so other tasks can
use the blitter.

PolyDraw()

Synopsis

void PolyDraw(
         struct RastPort * rp,
         LONG count,
         WORD            * polyTable );

Function

Draw connected lines from an array. The first line is drawn
from the current pen position to the first entry in the array.

Inputs

rp        - RastPort
count     - number of x,y pairs
polyTable - array of x,y pairs

Notes

Official prototype files declare count as LONG but
original ROM code only uses low 16-bits.

QBlit()

Synopsis

void QBlit(
         struct bltnode * bn );

Function

Queues a request for a blit. This request is queued at the end
of the list.

Inputs

bn - pointer to blitnode structure

Result

The routine that function in the bltnode is pointing to is
called when the blitter is ready for work. No other task will
be able to access the blitter while you're doing the blit.
Queued blits have precedence over a task that tries to own the
blitter via OwnBlitter(). So all queued blitter requests will
be done first until the task that attempts a OwnBlitter can
actually access the blitter.

Notes

Not all hardware has a blitter. On hardware where there is no
blitter, a blitter is simulated. Therefore all code that will
be executed in the function that is called must not contain
code that is hacking the blitter's register but should contain
calls to graphics functions instead.

QBSBlit()

Synopsis

void QBSBlit(
         struct bltnode * bn );

Function

Queues a request for a beam-synchronized  blit.

Inputs

bn - pointer to blitnode structure

Result

The routine that function in the bltnode is pointing to is
called when the blitter is ready for work. No other task will
be able to access the blitter while you're doing the blit.
Queued blits have precedence over a task that tries to own the
blitter via OwnBlitter(). So all queued blitter requests will
be done first until the task that attempts a OwnBlitter can
actually access the blitter.

Notes

Not all hardware has a blitter. On hardware where there is no
blitter, a blitter is simulated. Therefore all code that will
be executed in the function that is called must not contain
code that is hacking the blitter's register but should contain
calls to graphics functions instead.

ReadPixel()

Synopsis

LONG ReadPixel(
         struct RastPort * rp,
         WORD x,
         WORD y );

Function

Read the pen number of the given x,y coordinate.

Inputs

rp  - RastPort
x,y - Coordinate

ReadPixelArray8()

Synopsis

LONG ReadPixelArray8(
         struct RastPort * rp,
         WORD xstart,
         WORD ystart,
         WORD xstop,
         WORD ystop,
         UBYTE * array,
         struct RastPort * temprp );

Function

Read the pen numbers of a rectangular area into an array.

Inputs

rp            - RastPort
xstart,ystart - starting point
xstop,ystop   - stopping point
array         - array where pens are stored. Allocate at least
                (((width+15)>>4)<<4)*(ystop-ystart+1) bytes.
temprp        - temporary RastPort; copy of rp with
                - Layers == NULL
                - temprp->BitMap with Rows set to 1,
                - temprp->BytesPerRow set to (((width+15)>>4)<<1),
                  and temporary memory allocated for
                  temprp->BitMap->Planes[])

Result

The number of pixels read.

Notes

This function doesn't make sense on true-/hicolor rastports.

ReadPixelLine8()

Synopsis

LONG ReadPixelLine8(
         struct RastPort * rp,
         LONG xstart,
         LONG ystart,
         ULONG width,
         UBYTE           * array,
         struct RastPort * tempRP );

Function

Read the pen numbers of a horizontal line into an array.

Inputs

rp            - RastPort
xstart,ystart - coordinate
width         - count of pixels to read (must be positive).
array         - array for storing of the pen numbers. Size must be
                at least ((width+15)>>4)<<4 bytes.
tempRP        - see ReadPixelArray8().

Result

Number of pixels read.

Notes

This function doesn't make sense on true-/hicolor rastports.

RectFill()

Synopsis

void RectFill(
         struct RastPort * rp,
         LONG xMin,
         LONG yMin,
         LONG xMax,
         LONG yMax );

Function

Fills a rectangular area with the current pens, drawing mode
and areafill pattern. If no areafill pattern is defined fill
with foreground pen.

Inputs

rp - RastPort
xMin,yMin - upper left corner
xMax,yMax - lower right corner

ReleasePen()

Synopsis

void ReleasePen(
         struct ColorMap * cm,
         ULONG n );

Function

Release a pen that was previously allocated as an exclusive
or shared pen by the application. Any other application can
then obtain this pen and make changes to the color register
entries.

Inputs

cm - ColorMap structure where the pen was allocated
n  - The number of the pen

Result

An exclusive pen is deallocated for other applications to use.
A shared pen is only completely deallocated if no other
application is using it anymore.

RemFont()

Synopsis

void RemFont(
         struct TextFont * textFont );

Function

Remove a font from the list of public available fonts. Afterwards,
you can close it.

Inputs

textFont - Remove this font.

Result

None.

RemIBob()

Synopsis

void RemIBob(
         struct Bob * bob,
         struct RastPort * rp,
         struct ViewPort * vp );

Function

Remove a Bob immediately from RastPort and gel list.

Inputs

bob - Bob
rp  - RastPort
vp  - ViewPort

RemVSprite()

Synopsis

void RemVSprite(
         struct VSprite * vs );

Function

The VSprite is unlinked from the gel list.

Inputs

vs = pointer to VSprite to be removed from the gel list

ScalerDiv()

Synopsis

UWORD ScalerDiv(
         UWORD factor,
         UWORD numerator,
         UWORD denominator );

Function

Use this to precalculate the width/height of the destination
bitmap. As factor give the width/height of the original bitmap
that is to be scaled via ScaleBitMap(), as numerator give
the value you will write into bsa_XSrcFactor/bsa_YSrcFactor
and as denominator the value of bsa_XDestFactor/bsa_YDestFactor.

Inputs

factor      - a number in the range of 0..16383
numerator   - a number in the range of 1..16383
denominator - a number in the range of 1..16383

ScrollRaster()

Synopsis

void ScrollRaster(
         struct RastPort * rp,
         LONG dx,
         LONG dy,
         LONG xMin,
         LONG yMin,
         LONG xMax,
         LONG yMax );

Function

Scroll the contents of a rastport (dx,dy) towards (0,0).
The empty spaces is filled by a call to RectFill().
Only the pixel in the rectangle (xMin,yMin)-(xMax,yMax)
will be affected. The lower right corner (xMax, yMax) is
automatically adjusted to the lower right corner in case
it would be outside.
After this operation the Flags bit of the layer associated
with this rastport, if there is any layer, should be tested
for simple layers in case there has any damage been created.

Inputs

rp    - pointer to rastport
dx,dy - distance to move in x and y direction. Positive values go
        towards (0,0)
xMin,yMin - upper left  hand corner of the affected rectangle
xMax,yMax - lower right hand corner of the affected rectangle

ScrollRasterBF()

Synopsis

void ScrollRasterBF(
         struct RastPort * rp,
         LONG dx,
         LONG dy,
         LONG xMin,
         LONG yMin,
         LONG xMax,
         LONG yMax );

Function

Scroll the contents of a rastport (dx,dy) towards (0,0).
The empty spaces is filled by a call to EraseRect().
Only the pixel in the rectangle (xMin,yMin)-(xMax,yMax)
will be affected. The lower right corner (xMax, yMax) is
automatically adjusted to the lower right corner in case
it would be outside.
After this operation the Flags bit of the layer associated
with this rastport, if there is any layer, should be tested
for simple layers in case there has any damage been created.

Inputs

rp    - pointer to rastport
dx,dy - distance to move in x and y direction. Positive values go
        towards (0,0)
xMin,yMin - upper left  hand corner of the affected rectangle
xMax,yMax - lower right hand corner of the affected rectangle

ScrollRegion()

Synopsis

BOOL ScrollRegion(
         struct Region * region,
         struct Rectangle * rect,
         WORD dx,
         WORD dy );

Function

Scroll the rectangles in the region by the amount of pixels specified, within the
specified rectangle.

Inputs

region - pointer to a region structure
rect   - pointer to the rectangle within which the scrolling has to happen.
         If NULL, the region's bounds are used instead.
dx, dy - the amount of pixels by which to scroll the region. Negative values mean
         respectively left and up, positive values mean right and down.

Result

TRUE if the operation succeeded, FALSE otherwise.

Notes

This function doesn't exist in AmigaOS

ScrollVPort()

Synopsis

void ScrollVPort(
         struct ViewPort * vp );

Function

Move the ViewPort to the position specified in DxOffset and DyOffset
members of the ViewPort structure.

Result

None.

Notes

AROS video drivers can perform a validation of offsets, and may refuse
to scroll the screen too far (if they somehow can't provide the requested
offset). In this case offset values in the ViewPort will be updated in
order to reflect the real result of the operation.

SetABPenDrMd()

Synopsis

void SetABPenDrMd(
         struct RastPort * rp,
         ULONG apen,
         ULONG bpen,
         ULONG drawMode );

Function

Changes the foreground and background pen and the drawmode in one
step.

Inputs

rp - Modify this RastPort
apen - The new foreground pen
bpen - The new background pen
drawmode - The new drawmode

Result

None.

Notes

This function is faster than the sequence SetAPen(), SetBPen(),
SetDrMd().

This functions turns on PenMode for the RastPort.

SetAPen()

Synopsis

void SetAPen(
         struct RastPort * rp,
         ULONG pen );

Function

Set primary pen for rastport

Inputs

rp  - RastPort
pen - pen number (0...255)

Notes

This functions turns on PenMode for the RastPort.

SetBPen()

Synopsis

void SetBPen(
         struct RastPort * rp,
         ULONG pen );

Function

Set secondary pen for rastport.

Inputs

rp  - RastPort
pen - pen number (0...255)

Notes

This functions turns on PenMode for the RastPort.

SetChipRev()

Synopsis

ULONG SetChipRev(
         ULONG ChipRev );

Inputs

ChipRev - Chip Rev that you would like to be enabled

Result

chiprevbits - Actual bits set in GfxBase->ChipRevBits0

Notes

This function isn't implemented on all platforms.

SetCollision()

Synopsis

void SetCollision(
         ULONG num,
         VOID_FUNC routine,
         struct GelsInfo * GInfo );

Function

Call this function to set a specified entry (num) in the
user's collision vector table with the address of the
routine to be called by DoCollision().

Inputs

num     = number of collision vector
routine = pointer to user's collision routine
GInfo   = pointer to a GelsInfo structure

SetDisplayDriverCallback()

Synopsis

void SetDisplayDriverCallback(
         APTR callback,
         APTR userdata );

Function

Specify a display driver notification callback.

The callback function is called using "C" calling convention and its
declaration should have a form:

APTR DriverNotify(APTR object, BOOL add, APTR userdata);

The function will be called upon display driver insertion and removal.
Upon insertion the parameters will be the following:
  object   - A pointer to a struct MonitorHandle for the new driver
  add      - TRUE, indicates driver insertion
  userdata - User data originally passed to SetDisplayDriverCallback()
The function should return a pointer to opaque data object which will
be stored in the display driver handle structure.

Upon driver removal the parameters mean:
  object   - A pointer to opaque object returned by the callback when
             the driver was added.
  add      - FALSE, indicates driver removal.
  userdata - User data originally passed to SetDisplayDriverCallback()
Callback return value is ignored in removal mode.

Inputs

callback - A pointer to a function to call.
userdata - User-defined data, will be passed to the callback function

Result

None.

Notes

This function is private to AROS. Do not use it in any end-user software,
the specification may change at any moment.

SetDrMd()

Synopsis

void SetDrMd(
         struct RastPort * rp,
         ULONG drawMode );

Function

Set the drawing mode for lines, fills and text.

Inputs

rp       - RastPort
drawMode - see graphics/rastport.h for possible flags.

SetFont()

Synopsis

void SetFont(
         struct RastPort * rp,
         struct TextFont * textFont );

Function

Select a new font for rendering strings in a RastPort.

Inputs

rp - Change this RastPort
textFont - This is the new font

Result

None.

SetMaxPen()

Synopsis

void SetMaxPen(
         struct RastPort * rp,
         ULONG maxpen );

Function

Set the maximum pen value for a rastport. This will instruct the
graphics.library that the owner of the rastport will not be rendering
in any colors whose index is >maxpen. Therefore speed optimizations
on certain operations are possible and will be done.

Basically this call sets the rastport mask, if this would improve speed.
On devices where masking would slow things down (chunky pixels), it will
be a no-op.

Inputs

rp     = pointer to a valid RastPort structure
maxpen = longword pen value

SetOutlinePen()

Synopsis

ULONG SetOutlinePen(
         struct RastPort * rp,
         ULONG pen );

Function

Set the outline pen and turn on area outline mode.

Inputs

rp  - RastPort
pen - pen

Result

Previous outline pen.

SetRast()

Synopsis

void SetRast(
         struct RastPort * rp,
         ULONG pen );

Function

Set the entire contents of a specified RastPort to a specific colour.

Inputs

rp   --  pointer to the RastPort in question
pen  --  pen number to set the bitmap pixels to

Result

All pixels are set to the colour corresponding to the specified pen
number.

SetRegion()

Synopsis

BOOL SetRegion(
         struct Region * src,
         struct Region * dest );

Function

Sets the destination region to the source region.
Allocates necessary RegionRectangles if necessary
and deallocates any excessive RegionRectangles in
the destination Region. The source Region remains
untouched.
If the system runs out of memory during allocation
of RegionRectangles the destination Region will
.

Result

TRUE if everything went alright, FALSE otherwise
(out of memory).

SetRGB32()

Synopsis

void SetRGB32(
         struct ViewPort * vp,
         ULONG n,
         ULONG r,
         ULONG g,
         ULONG b );

Function

Changes a single color of a viewport.

Inputs

vp - Modify this viewport
n - Change this color. If the color is outside the range of
        valid colors, it will be ignored.
r, g, b - The new values for the red, green and blue. The
        valid range is from 0x000000 (no intensity) to
        0xFFFFFFFF (full intensity).

Result

If there is a ColorMap for this viewport, then the value will
be stored in the ColorMap.
The selected color register is changed to match your specs.
If the color value is unused then nothing will happen.

Notes

Lower order bits of the palette specification will be discarded,
depending on the color palette resolution of the target graphics
device. Use 0xffffffff for the full value, 0x7fffffff for 50%,
etc. You can find out the palette range for your screen by
querying the graphics data base.

SetRGB32CM()

Synopsis

void SetRGB32CM(
         struct ColorMap * cm,
         ULONG n,
         ULONG r,
         ULONG g,
         ULONG b );

Function

Set one color in the ColorMap.

Inputs

cm - ColorMap structure obtained via GetColorMap()
n  - the number of the color register to set
r  - red level   (32 bit left justified fraction)
g  - green level (32 bit left justified fraction)
b  - blue level  (32 bit left justified fraction)

Result

Store the (r,g,b) triplet at index n in the ColorMap structure.
The changes will not be immediately displayed. Use this function
before linking the ColorMap to a ViewPort. Do not access the entries
in the ColorTable yourself, as the ColorTable format is subject to
change.

SetRGB4()

Synopsis

void SetRGB4(
         struct ViewPort * vp,
         ULONG n,
         ULONG r,
         ULONG g,
         ULONG b );

Function

Changes a single color of a viewport.

Inputs

vp - Modify this viewport
n - Change this color. If the color is outside the range of
        valid colors, it will be ignored.
r, g, b - The new values for the red, green and blue. The
        valid range is from 0x0 (no intensity) to
        0xF (full intensity).

Result

If there is a ColorMap for this viewport, then the value will
be stored in the ColorMap.
The selected color register is changed to match your specs.
If the color value is unused then nothing will happen.

Notes

Lower order bits of the palette specification will be discarded,
depending on the color palette resolution of the target graphics
device. Use 0xf for the full value, 0x7 for 50%,
etc. You can find out the palette range for your screen by
querying the graphics data base.

SetRGB4CM()

Synopsis

void SetRGB4CM(
         struct ColorMap * cm,
         WORD n,
         UBYTE r,
         UBYTE g,
         UBYTE b );

Function

Set one color in the ColorMap.

Inputs

cm - ColorMap structure obtained via GetColorMap()
n  - the number of the color register to set
r  - red level   (0-15)
g  - green level (0-15)
b  - blue level  (0-15)

Result

Store the (r,g,b) triplet at index n in the ColorMap structure.
The changes will not be immediately displayed. Use this function
before linking the ColorMap to a ViewPort.

SetRPAttrsA()

Synopsis

void SetRPAttrsA(
         struct RastPort * rp,
         struct TagItem  * tags );

void SetRPAttrs(
         struct RastPort * rp,
         TAG tag, ... );

Function

Modify rastport with values from a taglist.

Inputs

rp   - RastPort
tags - see below

Tags

RPTAG_Font (struct TextFont *)  - Font for Text()
RPTAG_APen (UBYTE)              - Primary rendering pen
RPTAG_BPen (UBYTE)              - Secondary rendering pen
RPTAG_DrMd (UBYTE)              - Drawing mode (graphics/rastport.h)
RPTAG_OutlinePen (UBYTE)        - Area Outline pen
RPTAG_WriteMask (ULONG)         - Bit mask for writing

The following tags are compatible with MorphOS (V51) :

RPTAG_FgColor (ULONG)           - Primary rendering color in A8R8G8B8
                                  format. Only working on
                                  hicolor/truecolor bitmaps/screens.
RPTAG_BgColor (ULONG)           - Secondary rendering color in
                                  A8R8G8B8 format. Only working on
                                  hicolor/truecolor bitmaps/screens.
RPTAG_PenMode (BOOL)            - TRUE if traditional pen numbers
                                  should be used, FALSE if direct RGB
                                  colors should be used. Has no effect
                                  on non-RTG displays.

The following tags are compatible with AmigaOSv4 (V51) :

RPTAG_RemapColorFonts (BOOL)    - Automatically remap colorfonts to
                                  their color on hicolor/truecolor
                                  screens.

AROS-specific extensions

RPTAG_ClipRectangle (struct Rectangle *) - Clipping rectangle
RPTAG_ClipRectangleFlags (LONG) - RPCRF_RELRIGHT | RPCRF_RELBOTTOM
                                  (see graphics/rpattrs.h)

Result

None.

Notes

Setting one of RPTAG_ClipRectangle or RPTAG_ClipRectangleFlags
allocates internal extra data for the RastPort. After finishing using
this RastPort, you need to manually deallocate the extra data using
FreeVec(rp->RP_Extra).

SetSoftStyle()

Synopsis

ULONG SetSoftStyle(
         struct RastPort * rp,
         ULONG style,
         ULONG enable );

Function

Set the style of the current font. Only those bits set in 'enable' are
affected.

Inputs

rp     --  pointer to rastport
style  --  the style the font should have
enable --  mask for style bits

Result

The style bits used hereinafter (the font may not support all the styles
you wish to set). Note that this is possibly more style bits than you
affected by calling SetSoftStyle() as a font may have intrinsic style
bits set.

SetWriteMask()

Synopsis

ULONG SetWriteMask(
         struct RastPort * rp,
         ULONG mask );

SortGList()

Synopsis

void SortGList(
         struct RastPort * rp );

Function

Sort the current gel list by the y and x coordinates of it's
elements.
You have to call this routine prior to calling DoCollision()
of DrawGList or make sure that the list is sorted!

Inputs

rp  = pointer to RastPort that has an GelsInfo linked to it

StripFont()

Synopsis

void StripFont(
         struct TextFont * font );

Function

Removes a TextFontExtension from a font.

Inputs

font    - font to remove extension from.

SyncSBitMap()

Synopsis

void SyncSBitMap(
         struct Layer * l );

Function

If the layer has a superbitmap all the parts that are visible will
be copied into the superbitmap. This is usually not done except when
parts of a superbitmapped layer become hidden the visible parts are
stored into the superbitmap.

Inputs

l  - pointer to superbitmapped layer

Result

The superbitmap will be synchronized with the visible part. The
superbitmap attached to the layer will be up-to-date with what's
really in the layer.

Text()

Synopsis

void Text(
         struct RastPort * rp,
         CONST_STRPTR string,
         ULONG count );

Function

Write text to the rastport at the current position.
The current position is updated to a position after the text.

Inputs

rp     - RastPort
string - string to print
count  - number of characters to print

TextExtent()

Synopsis

void TextExtent(
         struct RastPort   * rp,
         CONST_STRPTR string,
         ULONG count,
         struct TextExtent * textExtent );

Function

This function determines the metric of the space that a text string
would render into.

Inputs

rp -     RastPort
string - address of string
count -  number of characters
textExtent - storing place for the result
             te_Width  - same as TextLength() result: the rp_cp_x
                         advance that rendering this text would cause.
             te_Height - same as tf_YSize.  The height of the
                         font.
             te_Extent.MinX - the offset to the left side of the
                              rectangle this would render into.
                              Often zero.
             te_Extent.MinY - same as -tf_Baseline.  The offset
                              from the baseline to the top of the
                              rectangle this would render into.
             te_Extent.MaxX - the offset of the left side of the
                              rectangle this would render into.
                              Often the same as te_Width-1.
             te_Extent.MaxY - same as tf_YSize-tf_Baseline-1.
                              The offset from the baseline to the
                              bottom of the rectangle this would
                              render into.

TextFit()

Synopsis

ULONG TextFit(
         struct RastPort   * rp,
         CONST_STRPTR string,
         ULONG strLen,
         struct TextExtent * textExtent,
         struct TextExtent * constrainingExtent,
         LONG strDirection,
         ULONG constrainingBitWidth,
         ULONG constrainingBitHeight );

Function

Tries to fill the given space with as many characters of the
font in rp as possible and returns that number.

Inputs

rp - Use the settings in this RastPort (e.g. Font)
string - Use this string
strLen - The length of the string
textExtent - The size actually occupied will be returned here
constrainingExtent - If non-NULL, the routine will use the
        dimensions of the box described here
strDirection - In which is the next character. Must be either 1
        or -1. If it is -1, then string must point to the end (the
        first character to check) of the text to fit (this is for
        checking text which runs from right to left).
constrainingBitWidth - If constrainingExtent is NULL, then this
        is the width of the bounding box.
constrainingBitHeight - If constrainingExtent is NULL, then this
        is the height of the bounding box.

Result

The number of characters which fit in the bounding box.
If any characters fit in the bounding box, then textExtent will
tell how large the minimal bounding box for the string is.

TextLength()

Synopsis

WORD TextLength(
         struct RastPort * rp,
         CONST_STRPTR string,
         ULONG count );

Function

Determines the length of a string in pixels.

Inputs

rp     - RastPort
string - address of string
count  - number of characters of string

Result

Length of string in pixels.

Notes

Use the newer TextExtent() to get more information.

UCopperListInit()

Synopsis

struct CopList * UCopperListInit(
         struct UCopList * ucl,
         WORD n );

Function

Allocates and initializes copperlist structures and buffers
internal to UCopList structure.

Inputs

ucl - pointer to a UCopList structure. Must not be NULL!
n   - number of instructions the buffer must be able to hold

Result

cl - pointer to a buffer that will accept n intermediate
     copper instructions

NOTE: this is a pointer to UCopList->FirstCopList!

UnlockLayerRom()

Synopsis

void UnlockLayerRom(
         struct Layer * l );

Function

Unlocks a previously locked layer for access by other applications
or intuition itself.
If a task has locked a layer multiple times it must unlock it
as many times as well as locks nest.
This functions does the same as layers/UnlockLayerRom()

Inputs

l - pointer to layer structure

Bugs

Does not save all registers.

VBeamPos()

Synopsis

LONG VBeamPos();

Inputs

none

Result

None.

Notes

This function isn't implemented on all platforms.

VideoControl()

Synopsis

ULONG VideoControl(
         struct ColorMap * cm,
         struct TagItem * tags );

ULONG VideoControlTags(
         struct ColorMap * cm,
         TAG tag, ... );

Inputs

cm   - pointer to struct ColorMap obtained via GetColorMap()
tags - pointer to a table of videocontrol tagitems

Result

error - 0 if no error ocurred in the control operation
        non-0 if bad colormap pointer, no tagitems or bad tag

Notes

Not implemented

WaitBlit()

Synopsis

void WaitBlit();

Function

Wait for the blitter to return to finish, ie. the function returns
when the blitter is idle.

Inputs

None.

Result

None.

Bugs

This function is unimplemented.

WaitBOVP()

Synopsis

void WaitBOVP(
         struct ViewPort * vp );

Inputs

vp - pointer to ViewPort structure

Result

None.

Bugs

This function is unimplemented.

WaitTOF()

Synopsis

VOID WaitTOF();

Function

Wait for vertical blank.

Result

Adds the task to the TOF queue; it will be signalled when the vertical
blank interrupt occurs.

WeighTAMatch()

Synopsis

WORD WeighTAMatch(
         const struct TextAttr * reqTextAttr,
         const struct TextAttr * targetTextAttr,
         struct TagItem  * targetTags );

Function

Determines how well two font descriptions match.

Inputs

reqTextAttr             - the required textattr.
targetTextAttr  - textattr of potential match.
targetTags              - tags for the targetTextAttr.

Result

A weight number which measures how well the TextAttrs
match. The weight may vary from 0 (no match) to
MAXFONTMATCHWEIGHT (perfect match).

Bugs

Does not yet take tags into account.

WriteChunkyPixels()

Synopsis

void WriteChunkyPixels(
         struct RastPort * rp,
         LONG xstart,
         LONG ystart,
         LONG xstop,
         LONG ystop,
         UBYTE           * array,
         LONG bytesperrow );

Function

Write a rectangular region of pen values into a rastport.

Inputs

rp            - destination RastPort
xstart,ystart - starting point
xstop,ystop   - stopping point
array         - array with pen values
bytesperrow   - The number of bytes per row in the source array.
                This should be at least as large as the number of pixels
                being written per line.

WritePixel()

Synopsis

LONG WritePixel(
         struct RastPort * rp,
         WORD x,
         WORD y );

Function

Write the primary (A) pen colour to the given coordinates of a
RastPort.

Inputs

rp  - destination RastPort
x,y - coordinate

Result

 0: pixel could be written
-1: coordinate was outside rastport

WritePixelArray8()

Synopsis

LONG WritePixelArray8(
         struct RastPort * rp,
         ULONG xstart,
         ULONG ystart,
         ULONG xstop,
         ULONG ystop,
         UBYTE           * array,
         struct RastPort * temprp );

Function

Write an array of pens into a rectangular area.

Inputs

rp            - destination RastPort
xstart,ystart - starting point
xstop,ystop   - stopping point
array         - array of pen values. Size must be at least
                (((width+15)>>4)<<4)*(ystop-ystart+1) bytes.
temprp        - temporary rastport
                (copy of rp with Layer set to NULL,
                temporary memory allocated for
                temprp->BitMap with Rows set to 1,
                temprp->BitMap with BytesPerRow set to ((width+15)>>4)<<1,
                and temporary memory allocated for
                temprp->BitMap->Planes[])

Result

Number of plotted pixels.

WritePixelLine8()

Synopsis

LONG WritePixelLine8(
         struct RastPort * rp,
         LONG xstart,
         LONG ystart,
         ULONG width,
         UBYTE * array,
         struct RastPort * tempRP );

Function

Draw a horizontal line from an array of pens.

Inputs

rp            - destination RastPort
xstart,ystart - start coordinate of line
width         - count of pixels to write (must be positive)
array         - array of pen values. Allocate at least
                ((width+15)>>4)<<4 bytes.
tempRP        - temporary rastport
                (copy of rp with Layer set to NULL,
                temporary memory allocated for
                temprp->BitMap with Rows set to 1,
                temprp->BitMap BytesPerRow == ((width+15)>>4)<<1,
                and temporary memory allocated for
                temprp->BitMap->Planes[])

Result

Number of plotted pixels.

XorRectRegion()

Synopsis

BOOL XorRectRegion(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Exclusive-OR the given rectangle to the given
region

Inputs

region - pointer to a region structure
rectangle - pointer to a rectangle structure

Result

TRUE if the operation was successful, else FALSE
(out of memory)

Notes

All relevant data is copied, you may throw away the
given rectangle after calling this function

XorRectRegionND()

Synopsis

struct Region * XorRectRegionND(
         struct Region    * Reg,
         struct Rectangle * Rect );

Function

Exclusive-OR the given rectangle to the given
region

Inputs

region - pointer to a region structure
rectangle - pointer to a rectangle structure

Result

The resulting region or NULL in case there's no enough free memory

Notes

All relevant data is copied, you may throw away the
given rectangle after calling this function

XorRegionRegion()

Synopsis

BOOL XorRegionRegion(
         struct Region * R1,
         struct Region * R2 );

Function

Exclusive-OR of one region with another region,
leaving result in second region.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

TRUE if the operation was successful,
FALSE otherwise (out of memory)

XorRegionRegionND()

Synopsis

struct Region * XorRegionRegionND(
         struct Region * R1,
         struct Region * R2 );

Function

Exclusive-OR of one region with another region.

Inputs

region1 - pointer to a region structure
region2 - pointer to a region structure

Result

The resulting region or NULL in case there's no enough free memory

Notes

This function is not present in AmigaOS

Copyright © 1995-2024, The AROS Development Team. Tutti i diritti riservati.
Amiga® č un marchio registrato di Amiga Inc. Tutti i diritti sui marchi vanno ai legittimi proprietari.